Secondary 1 Mathematics · G3 focus · Notes
Collect and organise data, choose and interpret charts, recognise misleading displays and calculate simple averages.
Data handling summary sheet: every method on 3 pages
A summary of the whole data handling chapter on three pages.
Page 1 of 3 Reading and drawing charts
Sec 1 Maths summary notes
Data handling methods, section by section
Page 1 of 3Reading and drawing charts
Choosing a display: which one answers the question?
| Display | Good for | Check |
|---|---|---|
| table | exact values | a pattern is harder to see |
| bar graph | comparing categories | equal bars; scale starts at |
| pictogram | small counts, simply | read the key; half symbol half count |
| line graph | change over time | equal gaps for equal times |
| pie chart | shares of one whole | angles give shares, not counts |
- Choose the display that answers the question, then check its one weak point.
- A table gives exact values, but a pattern is harder to see. A bar graph compares categories: the bars must be equal in width and the scale must start at 0. A pictogram suits small counts, so read the key and remember that half a symbol is half the count.
- A line graph shows change over time, with equal gaps for equal times. A pie chart shows shares of one whole: the angles give shares, not counts.
Frequency table, bar graph and pictogram: one survey shown three ways
| Fruit | Students |
|---|---|
| Apple | |
| Mango | |
| Grape | |
| Pear | |
| Total |
- 40 students each choose one fruit: Apple 16, Mango 10, Grape 8, Pear 6. Total: .
- Bar graph: bars of equal width, scale from 0, both axes labelled. Pictogram: read the key first. One circle is 4 students, so half a symbol is 2 students.
- If Grape is students, then .
- The percentage who chose grape is .
Reading a line graph: read across to the vertical axis
- The graph shows sales of bubble tea, each month. Read across to the vertical axis.
- (a) The lowest month is March. (b) January to March: .
- Percentage increase . (c) April to May: .
- Warning: divide by the original (April), not the new value.
Page 2 of 3Pie charts
Pie chart: a share of 360 degrees
- There are 72 students: Bus 30, MRT 18, Walk 16, Car 8. Sector angle .
- Bus is , MRT , Walk , Car . Check: .
- Back to a count: the walk sector is . How many students walk? .
- Draw the sectors one after another with a protractor.
Pie chart questions: angles add up to 360 degrees
- Angles in a pie chart add up to .
- Sectors are , , and . Find : , so , and .
- Bus is and cycle is . 30 more students take the bus than cycle. Find the total: the difference is , so total .
- Two sectors are and . The other two are in the ratio . Find the larger: rest , 1 part , larger .
From a bar graph to a pie chart: add the bars to find the total
- Add the bars to find the total: .
- Blue is .
- Red , green and yellow the same way.
Page 3 of 3Misleading graphs and surveys
Misleading graphs: check the axes
- Axis starts at 58: B looks 4 times A. Axis starts at 0: , so B is 10% more than A.
- In the line graph of profit, 2021 to 2025 is 4 years, drawn as one gap.
- A graph misleads when the axis does not start at 0, or when equal gaps stand for unequal times.
- Write: the axis starts at 58, so B looks 4 times A. Really B is only 10% more. Also check that pictogram symbols are of one size.
Writing a survey question: every answer fits one box
- The question is: How many hours of homework do you do each week? Faults: the boxes are 1 to 3 hours, 3 to 6 hours and 7 to 10 hours. 3 hours fits two boxes: they overlap. 6.5 hours fits no box: a gap. 0 hours fits no box: no answer for none.
- Fixed: 0 to under 3 hours, 3 to under 6 hours, 6 to under 10 hours, 10 hours or more. Every answer fits exactly one box.
- Ask a neutral question, not "Don't you agree that homework takes too long?". Cover every possible answer, and use groups that do not overlap.
Comparing pie charts: use each total
- A bigger sector is not always more people: the totals can differ.
- Club A has 20 members and the swim sector is : .
- Club B has 80 members and the swim sector is (the other sector is ): .
- Club B has the smaller sector but more swimmers: 24 is more than 10.
Worked examples
Data handling worked examples
The worked examples for the chapter, with the full working.
Start with a question and reliable data
Statistics helps us collect, organise and interpret information. First decide what you want to find out, whom or what you will observe, and how each observation will be recorded. A population is the whole group of interest; a sample is the part actually observed. A survey of one class tells you about that class; it may not represent the whole school.
Choose categories that do not overlap and that cover every possible response, or include an “other” category. Ask neutral questions: “Which journey do you usually make?” is clearer than “Don't you prefer the faster bus?” For measurements, state the unit and the rule for rounding. Record one observation per person unless multiple responses are intended.
Categorical data describe groups, such as transport type. Numerical data describe counts or measurements, such as number of siblings or journey time. A frequency is the number of times a category or value occurs. Tally marks help count; a frequency table makes the final counts easy to compare.
Worked example 1: a frequency table, bar graph and pictogram
Each of 24 students chooses their usual journey to school. There are 12 bus users, 8 walkers and 4 cyclists. Organise the results and find the fraction who walk.
| Journey | Frequency |
|---|---|
| Bus | 12 |
| Walk | 8 |
| Cycle | 4 |
| Total | 24 |
- Check that every student is counted once: .
- The fraction who walk is
- For a bar graph, label the categories, use equal-width separated bars, and show a numerical frequency scale starting at zero.
- For a pictogram with one symbol representing 4 students, draw symbols for Bus, 2 for Walk and 1 for Cycle.
Check: six symbols represent students. The heights of the bars show frequencies, not the number of symbols in the pictogram.
Choose a display that answers the question
| Display | Useful for | Watch out for |
|---|---|---|
| Table | Reading precise values and organising several variables | A pattern may be less obvious than on a graph. |
| Bar graph | Comparing categories by frequency | Use equal bar widths and a consistent, normally zero-based scale. |
| Pictogram | Showing a small set of counts simply | The symbol key matters; fractions of symbols must be clear. Changing icon size can exaggerate differences. |
| Line graph | Following a quantity over an ordered sequence, often time | Keep time spacing proportional. Joining unrelated categories suggests a meaningless trend. |
| Pie chart | Showing proportions of one whole | All sectors together represent one total. Small differences and many categories are hard to compare. |
A large sector in a small group's pie chart need not represent more people than a smaller sector in a much larger group. Compare the totals as well as the percentages.
Pie charts convert a fraction into an angle
The whole circle is . A category occupying one quarter of the observations needs one quarter of that angle. Therefore:
To draw a pie chart, calculate every angle, check their total is , draw a circle and a starting radius, then measure successive sectors with a protractor. Label the categories and state the total; do not rely on colour alone.
Worked example 2: find an angle and recover a count
A club has 40 members: 18 choose badminton, 12 choose swimming and 10 choose running. Find the swimming sector angle. A different club of 60 members has a running sector of ; find its number of runners.
- Swimming makes up of the first club, so
- Check the other sectors: badminton ; running . Their sum is .
- For the second club use its total of 60:
Check: and . A sector angle is measured in degrees; the answer to “how many members?” is a whole-number count.
Turn counts into a pie chart
For 12 bus users, 8 walkers and 4 cyclists, the total is 24. The sectors are 180°, 120° and 60°. Changing a count changes the total, so it can change every sector's angle.
Total 24. Bus: 12/24 × 360° = 180°. Walk: 8/24 × 360° = 120°. Cycle: 4/24 × 360° = 60°. Angles total 360°.
Read a line graph using both axes
Read the horizontal coordinate first, then the vertical value and its unit. A line sloping upward means an increase; downward means a decrease; horizontal means no change. The steepness depends on both axis scales, so do not compare slopes across differently scaled charts by appearance alone.
Worked example 3: change over time, with a limit to the conclusion
The water level in a tank is recorded at 08:00, 09:00, 10:00 and 11:00 as 20, 32, 29 and 41 cm. Find the greatest hourly increase, the total change, and an estimate at 09:30 if the level changes steadily between readings.
- Subtract successive levels: , , cm. The greatest hourly increase is , during both 08:00–09:00 and 10:00–11:00.
- Total change is final minus initial: . Check: .
- 09:30 is halfway between 09:00 and 10:00. Under the stated steady-change assumption,
The 09:30 value is an estimate between observations. The graph alone does not tell us why the level fell or justify extending the same trend beyond 11:00.
Ask whether the display supports the claim
Check the source, sample, dates, units, axis starting values, tick spacing, pictogram key and totals. A graph can contain correct numbers yet encourage a misleading comparison. An association between two quantities does not by itself show that one causes the other.
Worked example 4: a bar can look three times as tall
A shop sells 40 tickets on Monday and 50 on Tuesday. A bar chart starts its vertical axis at 35 tickets. Someone claims that Tuesday's sales are three times Monday's. Assess the claim.
- Actual ratio of sales: . Tuesday sold Monday's count, not three times.
- The increase is tickets, which is .
- The visible bar heights above 35 represent and tickets. Their ratio is , explaining the misleading visual impression.
Conclusion: use a zero baseline for bar-length comparisons and show the scale clearly. A line graph may use a shortened scale to show small changes, but the axis and the conclusion still need careful reading.
Dot diagrams, grouped tables and averages
A dot diagram places one dot per observation above its numerical value. Stacked dots show repeated values. For a display with 1 dot above 0, 3 above 1 and 2 above 2, there are observations; the total of their values is , not 6. Always check whether a dot represents one person, one group, or another unit.
A histogram shows numerical data grouped into intervals. For equal-width intervals, frequency can be plotted on the vertical axis, with touching bars to show adjacent intervals. A bar graph for separate categories has gaps. The modal class is the interval with the greatest frequency; it does not tell you an exact most common value inside that interval.
Worked example 5: place boundary values in the right class
Journey times, in minutes, are . Group them into , , , and . Identify the modal class.
- The first class includes 10 but not 0, so it contains 6 and 10: frequency 2.
- The second includes 20 but not 10: 12, 17, 20, 20 give frequency 4. The third contains 24, 28, 30: frequency 3. The last contains 35: frequency 1.
- Check the frequencies: , matching the number of observations. The greatest frequency is 4, so the modal class is minutes.
Check: a time of 20 belongs to the second class once, never to both the second and third. Equal-width grouping loses the individual values, even though it makes the overall pattern clearer.
The mean is the total of all values divided by the number of values. The median is the middle value after sorting; for an even count, average the two middle values. The mode is a most frequent value; a data set can have no unique mode or more than one mode. The range is largest minus smallest.
Worked example 6: averages from a frequency table
Six students read these numbers of books in a month: . Find the mean, median, mode and range, and say which average describes a typical student best.
- The total number of books is , so the mean is books. Equivalently, use frequencies:
- The list is already sorted. Positions 3 and 4 are both 1, so the median is book.
- The most frequent value is 1, appearing three times, so the mode is book. The range is books.
- The median of 1 is a useful description of the middle student here; the value 7 pulls the mean upward. The mean of 2 is useful if you want the equal share of the total books.
Check: mean × number of students , the correct total. With a frequency table, divide by the total frequency, not by the number of distinct values. No one average is best for every question.
If only grouped intervals are known, the exact individual values and exact mean cannot usually be recovered. Replacing values in each interval by its midpoint gives an estimated mean, ; keep the word “estimated”.
Common mistakes and checks
- Counting symbols without the key: multiply by the number each symbol represents.
- Using the wrong total in a pie chart: identify the whole group before calculating a count or angle.
- Confusing a value with its frequency: three students reading one book contribute 3 books in total.
- Finding a median before sorting: sort first, then locate the middle position or positions.
- Putting a boundary value into two intervals: read and carefully and count it once.
- Claiming a cause from a trend: describe the observed association and consider other possible explanations.
Practise interpreting the evidence
Use our Sec 1 data handling and statistics question bank for tables, pie charts, line graphs, dot diagrams, histograms and averages. Read every axis and key before calculating, then finish with a sentence about the original data.