Secondary 2 G3 Mathematics · Notes
Read dot diagrams, stem-and-leaf diagrams and histograms, choose useful representations and spot misleading claims.
Statistical Diagrams summary sheet: every method on 3 pages
A summary of the whole statistical diagrams chapter on three pages.
Page 1 of 3 Dot diagrams and stem-and-leaf diagrams
Sec 2 Maths summary notes
Statistical Diagrams methods, section by section
Page 1 of 3Dot diagrams and stem-and-leaf diagrams
Dot diagrams: one dot for each observation, then total, mean and mode
- One dot for each observation. Dots stack above the value. Count them.
- (a) The dot diagram shows the pets owned by 12 students. Students: . Pets: . Mean . Mode (the tallest stack).
- (b) Taxis stop at a hotel and the dots show passengers per taxi. Taxis: . Passengers: . Mean .
- Warning: the total is not : multiply each value by its dots.
Stem-and-leaf diagrams: the stem is the tens, the leaf is the ones, with a key
- The stem is the tens, the leaf is the ones. Order each row. Always give a key. For the first diagram the key is means 34, with rows , , , , .
- (a) The scores of 15 students are shown. Median . Range . Scores of 40 or more: 9 students, so .
- (b) Two classes' scores are shown back to back, with the key means 47 (A) and means 42 (B). A has 8 values: median . B has 9 values: median .
- Warning: the leaves are single digits: write , never .
Page 2 of 3Histograms for ungrouped and grouped data
Histogram for ungrouped data: bars of equal width centred on each value, height equals frequency
- Bars of equal width, centred on each value. Height is frequency. Label both axes.
- (a) Goals scored in 20 matches: frequencies 3, 6, 7, 3, 1 for 0 to 4 goals. Goals: . Mean . The tallest bar is the mode: 2 goals.
- (b) In the goals histogram, : bars for 3 and 4 goals give matches, so .
- (c) Draw a histogram for the marks: 0 (2 students), 1 (5), 2 (8), 3 (5). There are 20 students, bar height is frequency, and the mode is 2.
- Warning: a bar's height is the number of matches, not the number of goals.
Histogram for grouped data: continuous data, touching bars, classes of equal width
- Continuous data: bars touch. Classes of equal width. Read the class boundaries on the axis.
- (a) The waiting times (minutes) of 30 customers have frequencies 4, 9, 12, 5 with classes of width 10 from 0 to 40. Waiting 20 minutes or more: , so the fraction is . The modal class is 20 to under 30 minutes (tallest bar).
- (b) The heights (cm) of 25 plants: 0 to 5 (3), 5 to 10 (7), 10 to 15 (9), 15 to 20 (6). At least 10 cm: , so .
- Estimated mean cm.
- Warning: the exact times are lost: say "between 20 and 30", not "25".
Page 3 of 3Pie charts and misleading diagrams
Pie charts and bar charts: angle = frequency over total times 360°
- Angle . Pie: parts of a whole. Bar chart: compare amounts.
- (a) 90 students travel to school: bus 36, MRT 27, walk 18, car 9. The angles are , , and , and .
- (b) In a pie chart of 72 students, the bus sector is : students. (c) 45 of 120 students walk: . (d) A sector is 12 people. is a quarter: people.
- (e) 100 people choose a sport: 20, 30, 40, 10. , : , : , : (total ).
- Warning: a pie chart shows shares, not counts: give the total if the counts matter.
Spotting a misleading diagram: check the axis start, the scale and the labels
| Trick | What to say |
|---|---|
| uneven class widths | bars are not comparable |
| no label or units | we cannot tell what it shows |
| percentages add to more than | people chose more than one answer |
- Check the axis start, the scale, the labels. (a) Shop A sold 42 and shop B sold 46. The chart with the axis starting at 40 makes B look far better. The vertical axis starts at 40, not 0. B is only higher.
- Other things to check: uneven class widths mean bars are not comparable; no label or units means we cannot tell what it shows; percentages that add to more than mean people chose more than one answer.
- (b) A report says "sales have doubled" because a bar rose from 5 to 10 on a vertical axis that starts at 4. The bars look 1 and 6 units tall: 6 times. The real ratio is : the axis hides the 5 below 4.
- (c) Classes 0 to 10 and 10 to 30 minutes each hold 8 customers, but both bars are drawn the same width with height 8. The class 10 to 30 is twice as wide: 8 over 20 minutes a minute, but a minute for 0 to 10. Equal bars make the wide class look too large.
- Warning: a big-looking gap is only real if the axis starts at zero.
Worked examples
Statistical Diagrams worked examples
The worked examples for the chapter, with the full working.
Choose a diagram that answers the question
A statistical diagram organises observations so that we can see patterns, compare values and ask useful questions. A dot diagram or a stem-and-leaf diagram preserves individual values. A grouped histogram shows how values are distributed across intervals, but no longer tells us every exact observation.
Start by identifying the variable, its units and the number of observations. Label axes, state a stem-and-leaf key, and use consistent scales. For calculating and choosing averages, continue to mean, median and mode.
Dot diagrams: one dot for each observation
Place each dot above its value on a number line. Stack repeated values vertically. The horizontal position gives the value; the number of dots in the stack gives its frequency. Do not add the horizontal labels to count the people.
Worked example 1 — count carefully and interpret a condition
Ten students report the number of books they read in a month: .
- The total frequency is , agreeing with the ten students.
- “At least 3 books” includes both 3 and 4. Their frequencies total students.
- The fraction reading at least 3 books is , or .
Check: six students read fewer than 3; . The modal number is 2 books because its stack is tallest. The mode is a value, not the frequency 3.
The same ungrouped data as a histogram: give each integer value a unit-width bar centred on that value. Adjacent bars meet halfway between the integers. Heights are the frequencies 1, 2, 3, 2 and 2. Unlike the dots, the bars do not show individual people, but no distinct book counts have been merged into a wider class.
Stem-and-leaf diagrams: retain the actual values
A stem contains the leading digit or digits and a leaf contains the final digit. Always give a key: could mean 23 marks, 2.3 seconds or something else. Sort the leaves within each stem and preserve repeated values and empty stems.
Worked example 2 — build and read a stem-and-leaf diagram
Ten test marks are . Use tens as stems and units as leaves.
| Stem | Leaves in increasing order |
|---|---|
| 1 | 2 4 4 7 |
| 2 | 1 3 3 6 8 |
| 3 | 1 |
- There are leaves, so every observation is included.
- With ten marks, the median lies halfway between the fifth and sixth values. The first four are in stem 1, so these are 21 and 23:
- To count marks above 25, use 26, 28 and 31: there are 3 students. Reading only stem 2 would miss the 31.
Check: reconstruct the ordered list from the diagram. There need not be a student scoring the median 22. In a back-to-back diagram, both groups share stems and a key; on the left, read the units digit next to its stem and place smaller leaves nearest the stem.
Histograms: continuous intervals share boundaries
A histogram has a numerical horizontal axis divided into adjoining intervals. Its bars touch because the intervals meet. For equal-width intervals, frequency can be shown directly as bar height. A bar chart usually compares separate categories, so gaps between its bars are appropriate.
Worked example 3 — interpret grouped data without inventing exact values
The journey times of 20 students are grouped below. The class notation includes 10 minutes but excludes 20 minutes.
| Time interval | Frequency |
|---|---|
| 4 | |
| 8 | |
| 6 | |
| 2 |
- Check the total: students.
- Journeys taking at least 20 minutes belong to the last two intervals: students, or .
- The interval with the highest frequency is . This is the modal class; it does not establish an exact modal time of 15 minutes.
What cannot be recovered: the number taking between 12 and 18 minutes is unknown, because all eight observations are grouped together. Do not assume they are evenly spread. With unequal-width classes, frequency heights alone are misleading: bar area must represent frequency, which calls for a frequency-density scale.
Read the scale before trusting the impression
Worked example 4 — evaluate a misleading claim
A display compares two classes with mean test marks 60 and 66. Its vertical axis starts at 54. The visible bar heights are therefore 6 and 12 units, and a caption claims the second mean is “twice as high”. Is that correct?
- Recover the actual values from the axis: 60 and 66, not 6 and 12.
- The ratio of the means is , not 2.
- The percentage increase relative to the first mean is
- A bar chart starting at zero represents the size comparison fairly. If a shortened axis is used to show a small change, it must be clearly marked and the interpretation must use the labelled values.
Answer: the second mean is 10% higher, not twice as high. A difference of 6 marks also does not mean an increase of 6%.
Check the wider claim: means alone cannot show that every student in the second class scored higher. To compare distributions, inspect the underlying marks or suitable diagrams as well.
Explore what grouping hides
The ten marks are 12, 14, 14, 17, 21, 23, 23, 26, 28 and one final mark. Switch diagrams, then change the final mark from 31 to 38. The individual value changes, but its histogram class stays the same.
There are ten observations. The highest individual mark is 31. A dot diagram preserves each exact mark.
Common mistakes and checking strategies
- Dropping repeated data: count dots, leaves or frequencies and compare with the sample size.
- Misreading a key: reconstruct two values before answering a stem-and-leaf question.
- Double-counting a class boundary: follow the inequality signs. A value of 20 belongs in , not .
- Overclaiming from grouped data: say “modal class” and “estimated mean” when exact individual values are unavailable.
- Choosing an unsuitable diagram: dots are clear for small sets with few distinct values; stem-and-leaf diagrams retain values in an ordered display; histograms summarise larger numerical sets at the cost of detail.
Practise reading and comparing diagrams
Use the Sec 2 statistics question bank. Read the labels and key first, count the observations, and distinguish what a diagram shows from what it cannot tell you.