Secondary 1 Mathematics · G3 focus · Notes
Plot ordered pairs, build straight-line graphs, interpret gradient and intercepts, and explore how changing a linear rule changes its graph.
Linear Graphs summary sheet: every method on 3 pages
A summary of the whole linear graphs chapter on three pages.
Page 1 of 3 Coordinates and tables of values
Sec 1 Maths summary notes
Linear Graphs methods, section by section
Page 1 of 3Coordinates and tables of values
Coordinates and quadrants: writing a point as (x, y) and reading the four quadrants
- Write a point as : along the -axis first, then up or down for . The four quadrants have signs , , and .
- (a) Write down the coordinates of C and the quadrant it lies in. . Both are negative, so C is in the lower-left quadrant.
- A and D have the same , so they lie on the vertical line . On the -axis , as in . On the -axis , as in . Check the scale on each axis before you read a point.
- (b) PQRS is a rectangle with , and , and its sides are parallel to the axes. : S is above P, so it has the same , and S is level with R, so it has the same .
- Warning: the order matters. B is , not .
Table of values: putting x into the rule to find y, and solving for x when y is given
- Put into the rule to find . Given ? Solve the equation for .
- (a) The table is for with and . Find with : , with brackets round . Find with : , subtract 5 on both sides to get , then divide by on both sides to get .
- Check: goes down by 4 for each step of 2 in : 9, 5, 1, . Each column is a point: , , , .
- (b) Is the point on the line ? With , . is not , so is not on it.
- (c) Complete the table for with and . Divide first: .
- Warning: write a negative in brackets: , but is wrong.
Page 2 of 3Drawing and reading straight-line graphs
Drawing a straight line: plot at least three points, then rule a line through them
- Plot at least three points, then rule a straight line through them.
- (a) Draw for . At , . At , . The table gives , , and . Cross each point and rule the line.
- If the points are not in a straight line, one value is wrong: check it. Write the equation beside the line.
- (b) The graph also shows and . is vertical, through . is horizontal, through .
- Warning: the line stops at the ends of the range, from to 3 on the -axis; do not draw it further.
Reading values from a graph: from x to y, from y to x, intercepts and crossing points
- From : up or down to the line, then across. From : across to the line, then down or up. Draw dashed paths to show it.
- (a) On , find when . . Check: .
- (b) On the same line, find when . . Check: .
- (c) Where does cross each axis? The -intercept () is . The -intercept () is .
- (d) The line is also drawn. The two lines cross at . Check: and .
- Warning: the -intercept has : it is , not .
Page 3 of 3Gradient and linear graphs in real life
Gradient and y-intercept: gradient as rise over run, and finding c in y = mx + c
- Gradient , where rise is the change in and run is the change in . Up is , down is .
- (a) Find the gradient of line AB with and . The rise is 6 and the run is 4, so .
- (b) Find the gradient of the line through and . , so .
- (c) The line through P has gradient . Write its equation as . . With P: , , so , then , and subtracting 3 on both sides gives . The equation is .
- Parallel lines have the same gradient. A horizontal line has gradient 0; a vertical line has no gradient.
- Warning: subtract in the same order on top and bottom: over ; mixing the order gives .
Gradient and intercept in context: a taxi fare y = 4 + 1.5x
- Gradient is the change in for 1 step in . The -intercept is at the start, .
- (a) A taxi charges plus per km. The fare is for km. Write in terms of and find the fare for 6 km. . With , . The fare is .
- (b) Find the distance for a fare of . , subtract 4 on both sides to get , then divide by 1.5 to get . The distance is 4 km.
- (c) What do the gradient and -intercept of the graph mean? The gradient is , which is per km. The -intercept is 4, the starting charge.
- Warning: the two axes use different scales, so the line looks flatter than 1.5. Use the numbers, not the look.
Worked examples
Linear Graphs worked examples
The worked examples for the chapter, with the full working.
Coordinates connect numbers to a position
Two perpendicular number lines form the coordinate axes. The horizontal axis is the -axis; the vertical axis is the -axis. Their intersection is the origin . An ordered pair tells you to move horizontally first, then vertically. The order matters: and are different points.
A point on the -axis has ; a point on the -axis has . In the upper-right quadrant both coordinates are positive. In the upper-left they are negative, positive; in the lower-left both are negative; in the lower-right they are positive, negative.
Worked example 1: plot and describe a point
Plot and . State which quadrant contains each point.
- For , start at the origin, move 2 units left, then 3 units up. It lies in the upper-left quadrant.
- For , move 2 units right, then 3 units down. It lies in the lower-right quadrant.
- Read each point back in horizontal-then-vertical order: and .
Check: neither point lies on an axis because neither coordinate is zero. Their opposite coordinates put them opposite each other through the origin.
A linear rule makes a straight line
A relationship can assign a -value to each -value. In , multiply the input by 2, then add 1 to get the output . The points that obey the rule lie on a straight line.
From rule to graph
Choose useful -values, calculate , and record each pair in a table. Draw labelled axes with an even scale on each axis. Plot at least three points to catch calculation errors, then use a ruler to draw the line over the required domain. A continuous line represents all permitted intermediate -values. If the situation only allows whole-number inputs, plot separate points instead.
Worked example 2: make and check a table
Draw for , then find when .
- Substitute each into the rule. For example, when , .
- The coordinate pairs are Plot them and join with one straight segment from to .
- Read upward from to the line, then across to the -axis. This gives .
Check algebraically: . When increases by 1, increases by 2. If a plotted point breaks that pattern, check its calculation or position.
Read a value from the plotted segment
Explore gradient and intercept
In , is the gradient and is the -intercept: the value of where . A positive gradient rises from left to right; a negative gradient falls. Zero gradient gives a horizontal line.
The initial line is . It crosses the -axis at 1 and rises 2 units for each 1-unit move to the right. Change the gradient and intercept, then move the marked input.
At x = 1, y = 2 × 1 + 1 = 3. A move of 1 to the right changes y by +2. The y-intercept is (0, 1).
Measure gradient using coordinate changes
Choose two distinct points on the line. Compute the change in and the change in in the same direction: A horizontal line has zero vertical change, hence gradient 0. A vertical line has zero horizontal change: division by zero is undefined, so its gradient is undefined. Its equation has the form , not .
Worked example 3: a falling line
A straight line passes through and . Find its gradient.
- Move from to . The horizontal change is .
- The vertical change is , a downward change.
- Divide in the correct order:
The line falls 3 units for every 2 units moved to the right. Check in the reverse direction: , the same gradient. Both subtraction orders must reverse together.
Worked example 4: interpret a graph in context
A bicycle rental costs a fixed $3 plus $2 per hour. Part-hours are charged proportionally. Write the cost for hours, find the cost for 2.5 hours, and explain the graph's gradient and intercept.
- The time charge is dollars. Add the fixed charge:
- At , The cost is $8.
- The gradient is 2 dollars per hour: each additional hour adds $2. The vertical intercept is 3 dollars, the fixed charge.
Check: 2 hours cost $7 and 3 hours cost $9, so 2.5 hours cost $8. Draw only the part with , because negative rental time has no meaning. Label the horizontal axis “time (hours)” and the vertical axis “cost ($)”.
Common mistakes and further practice
- Reversing coordinates: means horizontal first, vertical second.
- Uneven scales: equal numerical changes on one axis need equal spacing along that axis.
- Using the appearance of steepness: count coordinate changes, especially when the axes have different scales.
- Reading the wrong intercept: the -intercept is found with ; the -intercept is found with .
- Joining every data set: use a continuous line only when intermediate inputs are permitted by the rule and situation.
For related Sec 1 algebra skills, use the linear equations practice bank. For practical applications, use the Sec 1 rate, speed and time bank. For further graph questions, the Sec 2 linear and quadratic graphs bank includes more advanced work; begin with its straight-line questions.